Clarke ENCORE MAX Manual do Operador descarregar pdf (Página 45)

CLARKE 1-45

ENCORE MAX

ADJUSTMENT

CASTORS

SQUEEGEE CASTER WHEEL ADJUSTMENT

Adjust if squeegee leaves water on floor. The wheels must be 3/16" (.476 cm) above the floor.

1. Set the parking brake.

2. Turn the key switch to the on position.

3. Put the Squeegee Blade Switch in the lower position.

4. Turn the key switch to the on position. This will turn off the vacuum fans.

5. Loosen the wheel brackets by turning the adjustment handles.

6. Adjust the wheels to 3/16" (.476 cm) above the floor.

7. Tighten the wheel brackets with the adjustment handles.

SQUEEGEE KNOB

Fig. 58

MAINTENANCE FOR THE REAR SQUEEGEE

To remove the squeegee, follow this procedure:

1. Remove the squeegee assembly by loosening the two knobs that attach the squeegee to the

machine as shown in figure 59. Pull the squeegee assembly off.

2. Inspect the squeegee blade.

3. If the blade is worn, turn the blade so that a new edge is in the wiping position.

4. Reinstall squeegee assembly on the machine.

Note

Toothed lock washers must be on top of support plate

Fig. 59

MAINTENANCE

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 60 61

Sem comentários

Clarke ENCORE MAX Manual do Operador Página 45