Clarke ENCORE MAX Manual do Operador descarregar pdf (Página 23)

CLARKE 1-23

ENCORE MAX

BRUSH SWITCH

SCRUB

PRESSURE

SWITCH

SCRUB BRUSH SWITCH

The scrub brush switch is located on the left side of the console to right of the solution control knob as shown

in figure 16. Pushing the scrub brush switch to up position will raise the scrub deck to the top position, the

scrub brushes will stop rotating, the water solenoid will de-energize and solution flow will stop. Pushing the

scrub brush switch down will lower the scrub deck to the set down pressure. The squeegee will lower and the

vacuum will activate. When the scrub brush and squeegee are on, they will be displayed as shown in figure 17.

The brushes will not rotate until the foot throttle is depressed. Releasing the foot throttle will raise the scrub

deck to the top position and the brushes will stop rotating.

SCRUB PRESSURE SWITCH

The scrub pressure switch is located on the left side of the console between scrub brush switch and the

squeegee/vacuum switch as shown in figure 16. Pushing the scrub pressure switch up selects the next

highest scrub setting available, increasing pressure. Selected pressure is displayed as a bar on the LCD

control panel. Pressing the scrub pressure switch down selects the next lowest setting available, decreasing

pressure as shown in figure 17.

BATTERY STATUS

METER

DECK SCRUBBING

PRESSURE METER

SCRUB

BRUSHES ON

SOLUTION

FLOW ON

SOLUTION

FLOW

METER

SCRUBBING

DOWN

PRESSURE

CONTROLS

Fig. 16

Fig. 17

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 60 61

Sem comentários

Clarke ENCORE MAX Manual do Operador Página 23