
1-28 CLARKE
ENCORE MAX
LIGHT SWITCH
ESP
ESP (OPTION)
The ESP switch is located on the left side of the console in between the squeegee/vacuum switch and the light
switch. The ESP switch transfers water from the recovery tank through a filter and into the solution tank. When
the switch is in the down position the pump will operate when the high recovery light is illuminated. Clean the
filter in the recovery tank when the tank is emptied.
NOTE
Do not place clean water in the recovery tank when using the ESP option, the solution tank could
become overfilled during operation.
LIGHT SWITCH (OPTION)
The light switch is located on the left side of the console to the left of the steering wheel as shown in figure 26.
Pushing the light switch to the up position will illuminate the optional light located in the center on the front of
the machine. Pushing the light switch to the down position will turn the light off.
HOUR METER
HOUR METER
The hour meter is activated when the key switch is in the “on” position. Screen 2 on the LCD display shows
total hours and panel screen display 3 shows total hours, brush hours and traction hours. This is useful for
determining service intervals.
Fig. 26
Fig. 27
CONTROLS
Comentários a estes Manuais