Clarke Clean Track L18 Especificações descarregar pdf (Página 14)

A-14 / ENGLISH

A-14 - FORM NO. 56041660 - Clean Track

16, 18

AUTHORIZED PERSONNEL MAINTENANCE

SOLENOID VALVE REMOVAL (WASH & RINSE MODEL)

1 Drain the recovery and solution tanks and tip the machine over onto its side.

2 See Figure 8. Remove the (2) (A) Screws.

3 Tip the machine back upright, grab hold of the Operator’s Handle (1) and push down to tilt the entire recovery / solution tank assembly back.

4 Disconnect the (2) solenoid valve wires. NOTE: Make note of their connection locations for reassembly.

5 See Figure 10. Tip the machine back over onto its side and disconnect Solution Hose (A) from the Solution Pump.

6 Disconnect Tube Connector (B) and remove Elbow (C).

7 Remove the (2) (D) Screws then remove the Nozzle Assembly from the machine. The Solenoid Valve (E) can now easily be disassembled from

the Nozzle Assembly.

8 Follow the above steps in reverse order to install the solenoid valve.

FIGURE 10

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

Sem comentários

Clarke Clean Track L18 Especificações Página 14