Clarke CMS10S2 Instruções de Operação descarregar pdf (Página 19)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ADJUSTMENTS

CHECKING AND ADJUSTING THE MITRE SETTINGS

1. Release the blade guard release

lever to release the mitre arm.

2. Lower the head until the blade

just enters the kerf plate.

3. Place a set square against the left

side of the fence and blade.

Move the mitre arm if required

until the blade is perfectly square

to the fence.

4. If pointer does not indicate zero

on the mitre scale, loosen the

screw that secures the pointer

and move the pointer as

necessary.

WARNING: MAKE SURE THAT THE SAW IS SWITCHED OFF AND UNPLUGGED

FROM THE MAINS SUPPLY BEFORE PERFORMING ANY ADJUSTMENTS.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sem comentários

Clarke CMS10S2 Instruções de Operação Página 19