Clarke CMS10S2 Instruções de Operação descarregar pdf (Página 10)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

BEFORE USE

1. Remove the saw from the packing material carefully.

• The following should be supplied. If anything is missing contact your

dealer.

BENCH MOUNTING

Holes are provided in all four feet to

facilitate bench mounting.

• Always mount your saw firmly

on a level surface to prevent

movement.

The tool can also be mounted to a

piece of 12.5 mm or thicker plywood

which can then be clamped to your

work support or moved to other job

sites and re-clamped when required.

• When mounting your saw to a piece of plywood, make sure that the

mounting screws do not protrude from the bottom of the wood.

• If the saw rocks on the surface, place a thin piece of material under one

saw foot until the saw is firm on the mounting surface.

MITRE SAW STAND (NOT SUPPLIED)

You can also mount the machine to

a purpose built mitre saw stand

available from your local Clarke

dealer.

Cross-Cut Mitre Saw with Laser Guide 2 AAA Batteries (for laser guide)

Work Clamp Spare Pair of Carbon Brushes

2 x Work Supports Shavings / Dust Collection Bag

254 mm Diameter 60 Tooth TCT Wood

Cutting Blade

Combined 6 mm Hexagon Key and

Cross Head Screwdriver

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Sem comentários

Clarke CMS10S2 Instruções de Operação Página 10