Clarke ECSS-1 Manual de Instruções

ASSEMBLY & INSTRUCTIONMANUALLS0409CHAINSAW SHARPENERMODEL: ECSS-1Part No: 3402075

10MAINTENANCE AND CLEANING• Use a dry paint-brush to clean the unit and remove grindingresidues.• Do not clean the unit with aggressive detergents or

11SPECIFICATIONNominal Voltage ... 230 VFrequency ...50 HzNominal Pow

12PARTS DIAGRAM

13PARTS LISTNo Description Part number1 Cable KPECSS10012 Strain Relief KPECSS10023 Cable Pressboard KPECSS10034 Screw ST 4x14 KPECSS10045 Capacitance

14DECLARATION OF CONFORMITY

15NOTES

16

2INTRODUCTIONThank you for purchasing this CLARKE productBefore attempting to use the product, it is essential that you read this manualthoroughly and

3SAFETY PRECAUTIONS• Ensure your mains voltage corresponds to the voltage mentioned on therating plate.• Persons with limited physical or mental abili

4OPERATING HINTS• Before you sharpen the chainsaw chain check it for damages, such as:- bent or abraded chain links.- broken cutting teeth, loose rive

5ELECTRICAL CONNECTIONSWARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONSTHOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINSSUPPLY.Before switching

6PARTS IDENTIFICATIONAFGIMNOIBCDEHJKLFAetalPesaBIwercSgnitsujdABhctiwSFFO/NOJylbmessAredloHniahCCeldnaHKrotacidnIelgnADrevoCevitcetorPLwercStnemtsujdA

7ASSEMBLYThe chain saw sharpener is supplied only partly assembled.1. Remove the bolts from bothpivot clamps as shown in Fig 4.2. Insert the axle into

8OPERATING WHEN SHARPENING, ALWAYS WEAR SAFETY GOGGLES.FITTING THE CHAIN TO THESHARPENER1. Lift up the adjustment wedge(G) and unscrew the fastenings

9SWITCHING ON/OFF6. To switch on, set the ON/OFFswitch to the ( I ) position. see Fig107. To switch off, set the ON/OFFswitch to the ( O ) position. s