Clarke CBS 355 Especificações descarregar pdf (Página 16)

FREEHAND SAWING

The ease with which many different and varied shapes can be cut is one of the most important features

of the bandsaw. Select a blade suitable for cutting the smallest radius in the work you have planned.

When freehand cutting, always feed the work slowly so that the blade can follow the line you wish to

saw. Make sure not to drag the work off line, forcing the blade sideways, or twisting it.

In many cases, it is helpful to rough cut about 6mm away from the line. For difficult curves which may

be too tight for the blade, make relief cuts onto the face of the curve so that these scraps will fall as

the final radius is sawn.

CONSUMABLES

A large range of bandsaw blades, sanding belts and sanding discs is available for your Bandsaw to

help you get maximum use from your machine.

Consumables shown here are obtainable from your CLARKE Dealer. If you have any difficulty in obtaining

them, please contact the CLARKE Customer Service Department.

BANDSAW BLADES

Width No. Of Teeth Part No.

6mm (¼”) 6 TPI 6460081

9mm (

d”) 6 TPI 6460082

12mm (½”) 6 TPI 6460083

6mm (¼”) 24 TPI 6460084

12mm (½”) 14 TPI 6460085

BANDSAW BLADES

Blades listed in the chart, are

standard blades available for

your Bandsaw. When

purchasing blades from other

sources ensure that the blade

material is 0.015" (0.4mm) in

thickness or less.

The chart also shows the

minimum cutting radius for

each blade, the best

thickness range for the wood

you are cutting, and the

minimum and maximum

thickness ranges.

SANDING DISKS

Grit / Grade Disks per Pack Part No.

60 5 6502102

80 5 6500809

120 5 6502097

¼”

½”

d”

6-12

24-48

12-24

Blade

Width

(mm)

Teeth

Per

Inch

Material Thickness (mm)

Min.

Radius

(mm)

MIN BEST MAX

SANDING BELTS

Grit / Grade Unit of Sale Part No.

60, 80, 120. 1 pack of 3 assorted 6460090

SANDING BELTS AND DISCS

Replacement sanding belts and sandpaper

discs are available from your CLARKE dealer,

and can be obtained in three grits; coarse,

medium and fine. Discs are self adhesive so

that no glue is required to fix them to the

aluminium disc.

1 2 ... 11 12 13 14 15 16 17 18 19

Comentários a estes Manuais

Sem comentários

Clarke CBS 355 Especificações Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com Serras circulares Clarke CBS 355