Clarke BOOST 28 Manual do Operador descarregar pdf (Página 14)

ENGLISH

-14- FORM NO. 71483A Clarke

Operator’s Manual (EN) - FOCUS II MID-SIZE AUTOSCRUBBER

Figure 10

Figure 11

HOW TO PREPARE THE MACHINE

FOR OPERATION

How To Install The Brush Or Pad (BOOST Machine)

To install the brush or pad on the machine, follow this

procedure:

1. Turn the key switch “ON”.

2. Put the brush head assembly in the “Up” position.

3. Turn the key switch “OFF”.

4. Go to the front of the machine.

5. Press on a brush or pad, under the ﬂ ex plates.

See ﬁ gure 10.

NOTE: When using a black pad, position pad on head. Lower head

and operate momentarily to afﬁ x pad to pad driver (if you have

difﬁ culty, position pad on ﬂ oor and lower head then operate.)

How To Remove The Brush Or Pad (BOOST Machine)

To remove the brush or pad from the machine, follow this procedure:

1. Turn the key switch “ON”.

2. Put the brush head assembly in the “Up” position.

3. Turn the key switch “OFF”.

4. Go to the front of the machine and pull downward on the brush or

pad until it releases from the ﬂ ex plates. See ﬁ gure 11.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 123 124

Sem comentários

Clarke BOOST 28 Manual do Operador Página 14