Clarke Log Buster 3 Especificações

OPERATION & MAINTENANCEINSTRUCTIONS0205MODEL NO: Log Buster 3PART No: 3402020LOG SPLITTER4 Tonne ForceLOG SPLITTER4 Tonne Force

6. Attach the safety cover using nuts bolts and washers supplied (Fig. 12). DO NOTovertighten nuts.WARNINGNEVER operate the machine with this cover re

OperationSplitting WedgeLog Support GuidesLog PusherSafety CoverOperating HandlesOil Pump AssemblyMotorMotor Start/StopButtonFig. 13• Before plugging

wobble, it must be repositioned by turning until it becomes stable.• Press the motor start button, and wait for the motor to reach full speed beforeco

IMPORTANT: use ONLY CLARKE HYDRAULIC OIL, availablefrom your nearest dealer.Part No: 1Ltr - 30508305Ltr - 30508353.5 Wipe the dipstick, using a clean

Trouble ShootingProblem Probable Cause RemedyLog fails to split. Incorrect positioning of thelog.Reposition the log.Log exceeds permitteddimensions or

Parts Diagram-15-

Parts ListItem Part No Description Qty01 SD30001 Locking Hex Nut M14 202 SD30002 Hex Nut (thin) M14 403 SD30003 Piston Ram 104 SD30004 Spring 105 SD30

Parts List ContItem Part No Description Qty-17-37 SD30037 Bolt M8 x 16 238 SD30038 Plastic Insert 239 SD30039 Log Pusher Assembly 140 SD30040 ‘O’ Ring

-18-

Thank you for purchasing this CLARKE Log Buster.Before attempting to use the machine, please read this manual thoroughly and follow theinstructions ca

Check ListBefore commencing to assemble your log splitter, please check for shortages and ordamage, any discrepancies should be reported to the Clarke

Safety PrecautionsWARNING: As with all machinery, there are certain hazards involved with their operationand use. Exercising respect and caution will

Extra Precautions for Log SplittersExtra special care is required when using this powerful tool to safeguard yourself and that ofothers around you.• B

• If the log moves away from the blade, retract the ram and rotate thelog through 90O as shown in Fig. 3.• Do not attempt to load the log in the mach

This machine must be wired up in accordance with the following colour code:BLUE - NEUTRALBROWN - LIVEGREEN/YELLOW - EARTH• Connect the BLUE coloured c

AssemblyWith the assistance of another person, carefully remove all contents from the carton, carefullylay out and check for shortages or damage etc,

Fig. 74. Loosen and remove 2 domednuts Fig. 9, store safely forre-use.2. Attach the legs to the body using nuts boltsand washers supplied (Fig. 7), lo