Clarke Fusion 201 Manual do Operador descarregar pdf (Página 30)

Page -30- Clarke

Operator's Manual -Fusion 20 Burnisher

How To Install The Pads

To install or remove pad on the machine,

follow this procedure:

1. Engage the parking brake.

2. Turn key switch "Off".

3. Push down on the headlift pedal to raise the

housing to its highest position. See Figure 19.

4. Go to the front of the machine.

5. While holding the pad retainer (page 38 , item

#42) with one hand, rotate the pad and pad driver

counter clockwise to loosen the pad retainer.

See Figure 20.

6. Remove the old pad and install a new one, being

careful to center it on the pad driver.

7. Retighten the pad retainer as tight as possible.

8. Raise the back of the machine to lower the pad

housing by lifting as shown in figure 21.

HOW TO PREPARE THE MACHINE FOR

OPERATION

Figure 19

Figure 20

Figure 21

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 63 64

Sem comentários

Clarke Fusion 201 Manual do Operador Página 30